AGC ETFE, NOWOFOL, (Translucent) Transparent Roof, ETFE Cushion
Etferoof.com
offers a wide range of clear agc etfe, nowofol, (translucent) Transparent Roof and etfe cushion. We care design and structural analysis as per various worlds.
Structural Characteristics:
ETFE is a very flexible material and is able to cope with large deformations before breakage. Elongations of 200-300% are possible. As being prestressed, it can accomodate the live loads. Glass, on the other hand, is very brittle and works as a plate. As a result, it is subjected to bending moments. ETFE is on the other hand is mainly subjected to tensile stress. The outer layer of an ETFE cushion is the most stressed layer where inner layer is the less stressed one. Middle layer takes almost no load, so basically it is used to created two compartments in the cushion.
The dimensions of a single panel is a major difference between glass and ETFE. ETFE can literally be quite long whereas glass panels are rather limited in size.
Altinoran Mall ETFE Roof
Shopping Mall
This project was completed in January 2017. It consists of total 2-layer 12 cushions. The design resembles a seashell which covers Altinoran Shopping Mall in Ankara, Turkey. Project includes design, structural calculation, fabrication and installation of steel structure and ETFE cushions.
Beyazit Library ETFE Roof
Recreation
This project has a huge single 2-layer square ETFE cushion divided into 4 areas by tensioned surface cables and installed in 2015. It covers the atrium of historical Beyazit State library in Istanbul. The steel structure for the partitioning the cushion is supported by a flying mast underneath.
Baku Olympic Stadium
Sport
ETFE cushions on the façade of Baku Olympic Stadium are illuminated by colorful LED fittings which have been installed by our team consisting of 60 rope access climbers. Our scope of the project was completed in 2014. The spectacular Olympic Stadium was opened in 2015 for the European Games.
Who We Are
was established in 1993. At first, it operated an architectural company in Turkey. Later, it passionately embraced design, structural analysis, fabrication and installation of textile architecture. It achieved many firsts in the field of membrane structures in domestic market.
In an attempt to spread knowledge of membrane, ETFE structures, partners of established and fully sponsored Institute of Membrane and Shell Technologies, Turkey in connection and as a licensed branch office of IMS e.V., associated institute of Anhalt University, Germany.
Quality assurance throughout the company is of utmost important for . As a result, has been accredited to ISO9001:2008 and ISO14001:2004 with a scope of design, engineering, fabrication and installation of tensile membrane structures. Internationally experienced and educated executive team leads to modern and innovation centric project undertaking.
has long been collaborating with Prof. Ramon Sastre, Catalonya Technical University, Barcelona who is the creator of world renowned software WinTess for membrane structures.
has proved itself by its achievements, ethical approach to business, long term customer relations through its long history in the sector by delivering quality and reliable service for each project. of any type or size. ‘s success is based primarily on inspiration, ambition, creativity, hard working, continuous education and training. We are ready to serve you at any projects no matter how much it is complicated. Our skilled people along with our state of the art equipment and spacious facilities provide ample set-up capacity and a flexible schedule to deliver quality fabrication for your projects.
Let us provide quality service as your partner.
Behind the scenes
View stream on flickr
Our Company
is dedicated to precision and excellency in membrane structures, particularly in ETFE roofs.
Be it design, structural analysis, fabrication or installation, is here to meet your ETFE roof or façade request . is a high quality with low cost option. Ask for a proposal to see yourself.
Our Services
Design
Design and Structural analysis as per various world standards by a team of experts accredited by Institute of Membrane and Shell Technologies, Anhalt University of Applied Sciences, Germany.
Fabrication
ETFE cushions are meticulously fabricated by CNC cutting, hot bar welding and testing at our factory. All the manufacturing process is under strict Quality Assurance.
Installation
Our installation team, highly experienced at various international landmark projects, knows how to install delicate ETFE cushions. Most of the members of this team are certified rope access installers.
See more :- http://www.etferoof.com/contact-us/
Comparison of ETFE with Glass
Both systems provide some capabilities like thermal insulation or light translucency. However, ETFE foil cushions offer some benefits over glass.
Both systems provide some capabilities like thermal insulation or light translucency. However, ETFE foil cushions offer some benefits over glass.
Structural Characteristics:
ETFE is a very flexible material and is able to cope with large deformations before breakage. Elongations of 200-300% are possible. As being prestressed, it can accomodate the live loads. Glass, on the other hand, is very brittle and works as a plate. As a result, it is subjected to bending moments. ETFE is on the other hand is mainly subjected to tensile stress. The outer layer of an ETFE cushion is the most stressed layer where inner layer is the less stressed one. Middle layer takes almost no load, so basically it is used to created two compartments in the cushion.
The dimensions of a single panel is a major difference between glass and ETFE. ETFE can literally be quite long whereas glass panels are rather limited in size.
Altinoran Mall ETFE Roof
Shopping Mall
This project was completed in January 2017. It consists of total 2-layer 12 cushions. The design resembles a seashell which covers Altinoran Shopping Mall in Ankara, Turkey. Project includes design, structural calculation, fabrication and installation of steel structure and ETFE cushions.
Beyazit Library ETFE Roof
Recreation
This project has a huge single 2-layer square ETFE cushion divided into 4 areas by tensioned surface cables and installed in 2015. It covers the atrium of historical Beyazit State library in Istanbul. The steel structure for the partitioning the cushion is supported by a flying mast underneath.
Baku Olympic Stadium
Sport
ETFE cushions on the façade of Baku Olympic Stadium are illuminated by colorful LED fittings which have been installed by our team consisting of 60 rope access climbers. Our scope of the project was completed in 2014. The spectacular Olympic Stadium was opened in 2015 for the European Games.
Who We Are
was established in 1993. At first, it operated an architectural company in Turkey. Later, it passionately embraced design, structural analysis, fabrication and installation of textile architecture. It achieved many firsts in the field of membrane structures in domestic market.
In an attempt to spread knowledge of membrane, ETFE structures, partners of established and fully sponsored Institute of Membrane and Shell Technologies, Turkey in connection and as a licensed branch office of IMS e.V., associated institute of Anhalt University, Germany.
Quality assurance throughout the company is of utmost important for . As a result, has been accredited to ISO9001:2008 and ISO14001:2004 with a scope of design, engineering, fabrication and installation of tensile membrane structures. Internationally experienced and educated executive team leads to modern and innovation centric project undertaking.
has long been collaborating with Prof. Ramon Sastre, Catalonya Technical University, Barcelona who is the creator of world renowned software WinTess for membrane structures.
has proved itself by its achievements, ethical approach to business, long term customer relations through its long history in the sector by delivering quality and reliable service for each project. of any type or size. ‘s success is based primarily on inspiration, ambition, creativity, hard working, continuous education and training. We are ready to serve you at any projects no matter how much it is complicated. Our skilled people along with our state of the art equipment and spacious facilities provide ample set-up capacity and a flexible schedule to deliver quality fabrication for your projects.
Let us provide quality service as your partner.
Behind the scenes
View stream on flickr
Our Company
is dedicated to precision and excellency in membrane structures, particularly in ETFE roofs.
Be it design, structural analysis, fabrication or installation, is here to meet your ETFE roof or façade request . is a high quality with low cost option. Ask for a proposal to see yourself.
Our Services
Design
Design and Structural analysis as per various world standards by a team of experts accredited by Institute of Membrane and Shell Technologies, Anhalt University of Applied Sciences, Germany.
Fabrication
ETFE cushions are meticulously fabricated by CNC cutting, hot bar welding and testing at our factory. All the manufacturing process is under strict Quality Assurance.
Installation
Our installation team, highly experienced at various international landmark projects, knows how to install delicate ETFE cushions. Most of the members of this team are certified rope access installers.
Get in touch
The Office
Address: BOSB Bakircilar Sitesi, Karanfil Cad. No21 K2 Beylikduzu, Istanbul - Turkey
Phone: +90 (212) 875 1243
Mobile: +90 (555) 548 2675
The Office
Address: BOSB Bakircilar Sitesi, Karanfil Cad. No21 K2 Beylikduzu, Istanbul - Turkey
Phone: +90 (212) 875 1243
Mobile: +90 (555) 548 2675
CONTACT US
+90 212 875 1243
Mobile: +90 555 548 2675
Fax: +90 212 875 0720
info@etferoof.com
+90 212 875 1243
Mobile: +90 555 548 2675
Fax: +90 212 875 0720
info@etferoof.com
Great information you shared. thank you foe sharing this blog.
ReplyDeleteTEXLON ETFE | ETFE Foil